Installation guide tape method

Tape installation guide

Important information

Position

Check surface

Make sure the contact surface is flat and even to ensure full contact of the adhesive tape.

Measure

Measure 48 inches (120 cm) from floor to top of bracket, and mark position of each contact surface with pencil or piece of masking tape.*

*For ADA (Americans with Disabilities Act) designated rooms – we recommend installation at 41 inches (104 cm) for accessibility.

Surface preparations

Cleaning

Clean all contact surfaces with isopropanol alcohol (IPA) to remove any greasy residue, let dry thoroughly prior to installation.

Primer

Applying a primer creates a new surface for the adhesive to bond to and will improve initial and ultimate adhesion to many materials.

Consult with a technician to determine which of the available primers that are suitable for you.

Install product

Remove strip

Peel of backing of adhesive strip on bracket, do not touch any of the adhesive tape or wall surface. Aim the bracket to the wall in level.

Pressure

Press entire bracket against the wall for 30-60 seconds to ensure bracket has adhered to surface. Install cover plugs in the bracket screw holes.

Applying strong pressure during installation ensures optimal bonding between the tape and contact surface.

Wait

Leave bracket on the wall for at least 24 hours before use. For best result 48 hours.

Place bottle

Use Spaza key

Place the Spaza key in the key slot, move the hook aside.

Place

Place the bottle and swing back the hook around the cap.

Need assistance?

Ensure a smooth installation and effective problem resolution by contacting us! If you encounter any difficulties or have questions before your installation, do not hesitate to reach out. Our team is here to assist you every step of the way.